Ecos Update.

Hej.

Nu er ESU kommet med en update som ser rigtig spændene ud, jeg sætter lige en beskrivelse at updaten med herunder.

Nu er jeg så så rigtig med heldig så min ECos gik i stykker i aftes så jeg kan ikke få glæde af denne opdatering endnu. .

Release Notes for Software 3.4.3 for ECoS 50200 / ECoS 50000 / Central Station Reloaded
=======================================================================================

Shuttle train:
- ADD: Stopover for shuttle trains. Up to 4 stopovers per each shuttle train.
  Each stopover has their own delay and can also be used directional.
  If no terminal stops are defined, you can also create a round trip.

Track diagram:
- ADD: When creating new elements, you can automatically select the last selected item
  by using a "double tap"
- ADD: New symbol for "X"-crossings.
- BUGFIX: Sometimes, symbols dissapeared and it was not possible to put new elements on
  the same place.

Locomotive control:
- ADD: Extended pickable area on the speed bar on the multi cab display
- ADD: Support for "mph" instead of "km/h".
- ADD: Changed layout for sub-divisions of speed indicator
- BUGFIX: Some problems with the motorized controllers when changing locomotives
- BUGFIX: M4 and RailComPlus symbols overlapped on monochrome displays

Switching accessories:
- ADD: New "Variant 2" for 4 aspect light signals. This symbol is to be used for
  signals with double coil solenoid motor.
- BUGFIX: DCC uncouplers will work again now
- BUGFIX: advance signals work correctly now
- BUGFIX: problems when switching 3 / 4 aspect signals through ECoSniffer

Programming:
- ADD: Support for DCC Paged-Mode in the DCC-programming setup menu
- ADD: "XL" programming mode in the setup programming menus. Selecting this checkbox will
  result in higher programming current and less sensitive overcurrent protection to allow
  the programming of power-consuming large scale locomotives.
- ADD: Much faster reading of ESU V4.0 decoders
- ADD: New error mistake if somebody by mistake connects the programming track with the
  main track
- ADD: POM-Verify also for accessories.
- ADD: When manupulating M4/mfx-Decoders, you now can disable the analogue modes
- BUGFIX: Some programming issues with Märklin mfx-Decoders (like Märklin Köf Telex)
- BUGFIX: When reading a DCC value, the read value was displayed but not used when writing again.
- BUGFIX: If you enforce the new identification of locomotives, this is done using "XL" settings now.
- BUGFIX: Edit locomotive menu sometimes did not switch back programming track to main track.
- BUGFIX: When using POM write, RailCom commands were sended even if RailCOM was disabled.
- BUGFIX: More stable detection of LokSound V4.0 decoders when reading in decoder profiles.
- BUGFIX: Correct values for Accl/Decl shown for LokPilot Basic
- BUGFIX: LokPilot micro V4.0 DCC was shown as LokSound classic

PC-Interface:
- ADD: Now you can shutdown your ECoS using the PC-Interface. The synopsis of the command is
  set(1, shutdown)
- BUGFIX: ECoS crashed if network was disconnected while still a view on the ECoSDetector was present.
- BUGFIX: When deleting locomotives, empty events were created for the "Lokmanager" and the view
  on the "Lokmanager" was released.
- BUGFIX: ECoSDetector generated events on ID 100. S88 feedback modules generated events on ID 200.
- BUGFIX: ECoS generated empty events on ID 1.

Misc:
- ADD: Save settings button in the setup menu
- ADD: Locomotive select menu tries to select the current locomotive
- ADD: Alphanumeric sort order in the ECoSlink-Menu
- BUGFIX: ECoS sometimes crashed when deleting a ECoSDetector
- BUGFIX: Some erros fixed when saving ECoSDetector or s88-Assingments in routes and shuttle trains.
- BUGFIX: Sometimes, touch events got lost resulting in locked keyboard
- BUGFIX: Special characters in ECoSBoost names sometimes were displayed incorrectly
- BUGFIX: Typo in french language locomotive edit menu (locomotive icons)

MVH Søren